If you’re considering upgrading your electric bike with a suspension stem, this guide covers everything from the basics of a suspension stem to installing one on your bike. We’ll also go over some benefits of using this type of accessory on your bike and how to choose the right one.

What Is A Suspension Stem?

Suspension stems are used to reduce the impact of shock transmission from the road to the body. In addition, they can help increase comfort on rigid electric bikes and are often added by riders who want to convert their existing bike into an e-bike or who have purchased a new electric bike with a rigid frame but want more comfort.

A suspension stem adds flexibility and damping to the front end of your bike, which helps absorb bumps in the road before they reach your hands or feet. Unlike a full-suspension fork, it does this without adding weight to your bike.

Why Would I Want To Install A Suspension Stem?

The answer is simple: to increase comfort, control, and performance. For example, if you’re riding in an area with poor roads or over large bumps, a suspension stem will help reduce the transmitted effect to your body. That is why full suspension bikes have become more popular today.

This feature can be useful for any rider of any level – from beginner to pro – as it allows them to maintain control of their bike in rough terrain. In addition, a suspension stem can provide greater stability and improve your bike's overall performance by reducing vibrations while pedaling at high speed or climbing hills.

Where Can I Get A Suspension Stem For My Bike?

You can get a suspension stem online or in a bike shop. You can find them at your local bike shop, but you may have to go through several websites before finding what you want. However, if you want something specific, only a few options bike stores can give you what you're looking to get.

Installing suspension stems are great for comfort and safety. So, actbikes would be an excellent option if you want electric bikes with reliable suspension systems.

How To Choose The Right Stem Length For Your Bike

When choosing a stem for your bike, remember a few things.

Start with a measurement of your current setup.

To start, you need to measure the length of your current stem. Measure from the center of the bar clamp to the lowest point of contact between your front tire and frame.

Next, measure both angles: saddle height and setback. Saddle height is measured at 90 degrees from horizontal while setback is measured horizontally in line with where your Seatpost meets your frame—it's usually just below or above where your saddle meets its rails.

Next up are reach and head tube angle (HTA). Reach is how far forward or back from vertical a rider sits on their bike—this can change depending on what type of handlebar and stem setup people use as well as how low some riders prefer their saddles set at for them not to feel like they're falling off when cornering aggressively around tight corners on steep descents.

Consider how you want the bike to feel.

Once you’ve decided what type of riding you want to do most, it’s time to figure out which stem length will work best for your bike. A shorter stem is typically better for descending, while a longer one is more suitable for climbing and sprinting. However, these generalizations don't apply in every situation—it's important to consider how you want the bike to feel when making this decision.

Set your bike up the way you like it, then measure.

Once your bike is set up the way you like it, measure the distance from the bars' center to the seat tube's center. Then, measure again, with a straightedge placed on each bar. The difference between these measurements will give you an idea of what stem length will work best for your riding style and body type.

Finally, Take careful measurements, then adjust your stem length in small increments to get the perfect fit.

To get the right fit, you'll need to take some measurements. Here's what you'll want to measure:

• The distance between the center of your stem and the center of your bottom bracket (the part of your bike that holds the pedals). This distance is usually measured in millimeters or inches, depending on how it's marked on your bike (some bikes have this measurement stamped into their top tube).
• The distance between your stem's center and your handlebars' center. This distance can be measured in millimeters or inches; sometimes, it's labeled "H" for handlebar height.

How Do I Install A Suspension Stem On My Bicycle?

Before you install a suspension stem, it's important to know how the installation process varies depending on the type of stem you choose. For example, some suspension stems use a headset press for installation, which involves using a special press tool to compress bearings in your headset and allow for fitment with your fork.

Other stems are threaded through existing holes in your frame and then tightened with an Allen key/hex wrench (or similar). Before beginning this process, note any specific instructions for your suspension stem.

5 Things You Should Know About Suspension Stems

This suspension system was popular in the 90s, but the suspension fork's introduction did no good. However, at actbikes, you can get some of these suspension fork system bikes at a little over $1,000.

However, the suspension stems are gradually coming back to the fold. As a result, there are many facts you need to learn about suspension stems.

Firstly, suspension stems are available in a variety of lengths. The length of a suspension stem is measured from the centerline of your wheel bearings to the centerline of your fork crown.

A longer stem gives you more leverage over your front wheel, meaning more force has to be applied to turn it. Conversely, a shorter stem makes steering easier and reduces weight by moving some components away from your wheel's centerline.

The angle at which you mount your fork can affect how stable you feel when riding on bumpy terrain or when trying to make sharp turns at higher speeds. Generally speaking, a steeper angle will allow for quicker steering while increasing stability; however, lower angles may limit how quickly you can steer around obstacles in your path without losing control over the front end of your bike because less leverage exists between the handlebars and steering tube (whereby steering forces are transferred).

Stems come with different widths as well—generally speaking, wider stems offer greater stability but require more material at each end where they bolt together, so they tend not to be as stiff overall compared with narrower ones (which typically have less material used per assembly point).

Some advanced tricks involve using two different diameters within one system - such as 6mm & 4mm - but these require special tools/knowledge before attempting them yourself due to issues like clearance issues which could cause serious damage if not handled properly.

Below is a breakdown of 5 things you should know about suspension stems;

Suspension Stems Offer More Comfort Than Wider Tires

A suspension stem is one of the most effective ways to reduce shock transmission to your body. As you ride, your body will experience oscillations that can cause discomfort, fatigue, and muscle strain. A suspension stem can help mitigate these effects by absorbing some of the shocks caused by cracks in the road or potholes.

You'll also enjoy more comfort if you choose a larger tire on your e-bike. But when it comes down to it, while wider tires may look great and offer better traction, they're not always ideal for all riders due to their bouncier nature—and this has nothing to do with being overweight.

Suspension Stems Come In Different Angles

Stems come in wide angles, from very low (roughly 6 degrees) to very high (over 30 degrees). The angle of the stem affects how your bike handles and what you get out of it.

• Low-angle stems are good for tight corners, where you might need to make quick turns. They also tend to be more comfortable because they sit you straight and give you more room for movement. But this is not always true: if you're riding on rough roads or off-road trails that require heavy braking and steering input, then this type may cause strain on your hands and wrists over time.
• High-angle stems allow greater control over your bike's handling but can make it harder for beginners to keep their balance going over bumps in the road or trail. They tend to feel stiffer than low ones but offer better weight distribution across all four wheels—which helps prevent an unstable ride—and often have less flexion into the handlebars when braking hard at speed. As a result, this variety suits those who want outright performance above all else; however, they're not necessarily suitable for comfort on longer rides since they place riders further away from their bikes' center of gravity.

You Can Use Them On Rigid Electric Bikes

Once your suspension stem is installed, you can use it on any type of electric bike. The benefits of using a suspension stem are that they'll keep you safer and more comfortable on the road. You may also see an increase in range since the extra weight from a full suspension system is lessened by removing it from the front end.

So, you can get both comfort and speed if you put a suspension stem on your rigid electric bike.

Reduces The Impact Of Shock Transmission on The Body

Do you know that feeling when you ride your bike and hit a bump? Or maybe a pothole? Every time this happens, it's like a mini-earthquake in your body. Your arms, hands, and wrists take the brunt of the shock. The stem reduces the impact of this shock transmission by absorbing some of it before it reaches your shoulders.

They Are Available In Various Lengths

The length of your suspension stem will depend on the angle of your handlebars. The angle of your handlebars, in turn, can be determined by two things:

• The angle at which your frame sits on top of the front fork (more below).
• The position of where you want to mount the stem on the frame. Some frames require mounting brackets for attaching a suspension stem; others have an attachment point built into them that does not require additional hardware.

The length of a Suspension stem is important because handling your e-bike is easier if it is not too high or low. The most important thing is to ensure the stem does not restrict your ability to reach handlebars. If you have a suspension fork, it’s easy because it has a built-in attachment point below where you attach the stem. Measure up to where you want your handlebars placed, and then purchase a suspension stem accordingly.

What Angle Should My Bike Stem be?

The angle of your bike stem is important because it will change how your bike rides and handles. For example, a steeper angle will make the front end feel lower to the ground, which might be better for climbing hills but can also feel more unstable at high speeds. Conversely, a shallower angle will make the front end feel higher off the ground and easier to control on descents, but it can also feel twitchy when riding on flat terrain.

The stem angle should be in the range of -10 to +17. Charts will give you recommendations based on height, weight, riding style, etc. So, what Type of Bike Stem Do I Need? The type of bike stem depends on handlebars and length and shape.

Wrapping Up

In conclusion, we hope this guide has helped you understand what a suspension stem is and why you should consider installing one on your e-bike.

They're an affordable way to make your ride more comfortable, and anyone with basic bicycle maintenance skills can easily install them. If you want more information or wish to purchase one of these products, you can check out some reliable e-bike stores and online sites.

However, you need to take note of the length and major features of the stems that would be suitable for your electric bike.

So, that is all you need to know about suspension stems. Then, you can check our online store actbike.com to shop for electric bikes with good suspension systems.